What to Examine if Your Hot Water Service is Not Working

Call Today

Listed here below you'll find additional really good guidance all about No Hot Water — Water Heater Repair.

Many modern-day homes take advantage of an electrical water heater for their furnace, because of its benefit and ease of use. Nonetheless, much like any other electrical appliances, troubles might occur with its usage, all of a sudden. It can be truly frustrating to awaken to a chilly shower rather than a hot one or having your bathroom with water that isn't hot enough or perhaps as well hot. Whatever the instance might be, water heater troubles can be rather nerve-racking. Fortunately, we have actually made a list of feasible options to your water heater concerns. There are a variety of factors that can trigger many of these troubles, it could be an issue with the power supply, the electric burner, or the thermostat. Prior to doing anything, ensure you switch off the main power supply for safety and security. Whatever the issue is, getting it fixed must not position way too much of a problem if you adhere to these steps:

Call A Specialist:

If after replacing all damaged parts and resetting your temperature level, the water heater still isn't functioning, you might need to speak to a professional plumber for a specialist opinion. The issue with your heater could be that the cold and hot taps have been switched over or it may be undersized for the quantity of hot water needed in your house. Whatever the instance may be, a professional plumber would certainly assist solve the issue.

Examine Your Power Supply:

As fundamental as this might seem, it is extremely essential. Without sufficient power, your hot water heater will certainly not function. So the first thing to do when your water unexpectedly retires is to confirm that it isn't a power issue. Check if the fuse is blown out or the breaker stumbled. If the circuit breaker is the issue, merely turn it off and on again. Replace any type of damaged or worn-out fuse. Check the device with power after these changes to see if it's now working.

Check Your Thermostat:

If your water heater still isn't functioning or the water coming out isn't hot sufficient, you might need to examine the temperature level setups on your upper thermostat. Make certain the breaker is turned off prior to doing anything. Open the gain access to panel and also press the red button for temperature level reset over the thermostat. This ought to assist heat up the water. Transform the circuit breaker back on as well as examine if the trouble has been fixed.

Examine the Heating Element in the Water Heater:

If it's not a power trouble, then attempt having a look at your burner if it is still functioning. Evaluate each of your heating elements to make sure the trouble isn't with any of them. If any one of them is damaged, replace that part and after that examine whether the warm water is back on.

Verdict

Hot water heater problems are not always major. A number of them are because of minor problems like a blown fuse or damaged burner. Changing the faulty components need to suffice. Nevertheless, if you are still not able to fix the problem, give a call to your closest plumber to find to get it repaired.

Common Reasons Why Your Hot Water Heater Isn’t Working

Water Gets Too Hot

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

Water Doesn’t Get Hot

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

Leaking Water Heater

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

Noisy Water Heater

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

Pilot Light Keeps Going Out

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

Water Smells Bad

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

Water Looks Brown Or Rusted

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

Do you enjoy reading up on Hot Water Heater Repair? Place a short review further down. We'd be glad to listen to your views about this write-up. Hoping that you visit us again before long. Loved our article? Please share it. Let someone else check it out. We thank you for reading our article about Hot Water Heater Repair.

Schedule Appointment